Uncompressing Linux... done, booting the kernel. Welcome to the rescue system recovery login: Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.5.0rpi-sources-v7+ (root@Gunter1) (gcc version 4.8.5 (Gentoo 4.8.5 p1.3, pie-0.6.2) ) #1 SMP Mon Mar 14 12:02:38 GMT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] cma: Reserved 256 MiB at 0x20000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 13 pages/cpu @ba6e3000 s22528 r8192 d22528 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ 0.000000] Kernel command line: cma=256M@512M dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa01041 bcm2709.serial=0x90f55b smsc95xx.macaddr=B8:27:EB:90:F5:5B bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/sda3 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait cma=256M@512M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 683848K/966656K available (6893K kernel code, 463K rwdata, 1892K rodata, 500K init, 778K bss, 20664K reserved, 262144K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB) [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x8089c748 (8786 kB) [ 0.000000] .init : 0x8089d000 - 0x8091a000 ( 500 kB) [ 0.000000] .data : 0x8091a000 - 0x8098dc6c ( 464 kB) [ 0.000000] .bss : 0x80990000 - 0x80a52a1c ( 779 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000031] Switching to timer-based delay loop, resolution 52ns [ 0.000345] Console: colour dummy device 80x30 [ 0.001674] console [tty1] enabled [ 0.001736] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001828] pid_max: default: 32768 minimum: 301 [ 0.002269] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002332] Mountpoi[ 0.635981] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1 [ 0.645724] SCSI subsystem initialized [ 0.649727] usbcore: registered new interface driver usbfs [ 0.655376] usbcore: registered new interface driver hub [ 0.660863] usbcore: registered new device driver usb [ 0.676038] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-09 18:11 [ 0.712221] clocksource: Switched to clocksource arch_sys_counter [ 0.768766] VFS: Disk quotas dquot_6.6.0 [ 0.772893] VFS: Dquot-cache hash table entries: 1024 (order[ 0.799310] NET: Registered protocol family 2 [ 0.805046] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.812305] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.818953] TCP: Hash tables configured (established 8192 bind 8192) [ 0.825503] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.831501] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.838288] NET: Registered protocol family 1 [ 0.843223] RPC: Registered named UNIX socket transport module. [ 0.849175] [ 1.939824] bcm2835-rng 3f104000.rng: hwrng registered [ 1.945142] vc-cma: Videocore CMA driver [ 1.949090] vc-cma: vc_cma_base = 0x00000000 [ 1.953852] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.959272] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.964951] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 1.973826] [drm] Initialized drm 1.1.0 20060810 [ 1.980039] [drm:vc4_hdmi_bind] *ERROR* Failed to get pixel clock [ 1.986238] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 1.994762] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 2.019077] brd: module loaded [ 2.032752] loop: module loaded [ 2.038018] vchiq: vchiq_init_state: slot_zero = 0xa0400000, is_master = 0 [ 2.046706] Loading iSCSI transport class v2.0-870. [ 2.052615] usbcore: registered new interface driver smsc95xx [ 2.058454] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.264725] Core Release: 2.80a [ 2.267904] Setting default values for core params [ 2.272791] Finished setting default values for core params [ 2.478861] Using Buffer DMA mode [ 2.482224] Periodic Transfer Interrupt Enhancement - disabled [ 2.488076] Multiprocessor Interrupt Enhancement - disabled [ 2.493691] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 2.498073] Dedicated Tx FIFOs mode [ 2.501969] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xa0448000 dma = 0xe0448000 len=9024 [ 2.511901] FIQ FSM acceleration enabled for : [ 2.511901] Non-periodic Split Transactions [ 2.511901] Periodic Split Transactions [ 2.511901] High-Speed Isochronous Endpoints [ 2.528791] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80486544 [ 2.534741] WARN::hcd_init_fiq:414: FIQ ASM at 0x804868a4 length 36 [ 2.541035] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb8a2000 [ 2.547135] dwc_otg 3f980000.usb: DWC OTG Controller [ 2.552166] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 2.559582] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 2.565245] Init: Port Power? op_state=1 [ 2.569188] Init: Power Port (0) [ 2.572745] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.579562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.586859] usb usb1: Product: DWC OTG Controller [ 2.591588] usb usb1: Manufacturer: Linux 4.5.0rpi-sources-v7+ dwc_otg_hcd [ 2.598508] usb usb1: SerialNumber: 3f980000.usb [ 2.604119] hub 1-0:1.0: USB hub found [ 2.607950] hub 1-0:1.0: 1 port detected [ 2.613008] usbcore: registered new interface driver usb-storage [ 2.619368] mousedev: PS/2 mouse device common for all mice [ 2.626155] bcm2835-cpufreq: min=600000 max=900000 [ 2.631329] sdhci: Secure Digital Host Controller Interface driver [ 2.637573] sdhci: Copyright(c) Pierre Ossman [ 2.642451] sdhost: log_buf @ a0446000 (e0446000) [ 2.722265] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 2.748251] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.754608] ledtrig-cpu: registered to indicate activity on CPUs [ 2.760822] hidraw: raw HID events driver (C) Jiri Kosina [ 2.766652] usbcore: registered new interface driver usbhid [ 2.772282] usbhid: USB HID core driver [ 2.781215] Initializing XFRM netlink socket [ 2.787274] NET: Registered protocol family 10 [ 2.793455] sit: IPv6 over IPv4 tunneling driver [ 2.799163] NET: Registered protocol family 17 [ 2.802558] Indeed it is in host mode hprt0 = 00021501 [ 2.808997] Key type dns_resolver registered [ 2.814309] Registering SWP/SWPB emulation handler [ 2.820053] registered taskstats version 1 [ 2.824471] vc-sm: Videocore shared memory driver [ 2.829208] [vc_sm_connected_init]: start [ 2.842660] [vc_sm_connected_init]: end - returning 0 [ 2.848947] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 2.857535] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 2.866666] Waiting for root device /dev/sda3... [ 2.870232] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.872379] mmc0: new high speed SDHC card at address 59b4 [ 2.873371] mmcblk0: mmc0:59b4 USD 7.51 GiB [ 2.877267] mmcblk0: p1 p2 < p5 p6 p7 > [ 2.880589] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 2.880700] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 2.982273] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.9889[ 3.192543] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 3.199287] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.207362] hub 1-1:1.0: USB hub found [ 3.211264] hub 1-1:1.0: 5 ports detected [ 3.217175] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 3.225763] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 3.492259] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 3.612547] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 3.619453] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.629658] smsc95xx v1.0.4 [ 3.696404] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:90:f5:5b [ 3.708755] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 3.717306] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 3.802263] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 3.939763] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370 [ 3.946703] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.954081] usb 1-1.2: Product: 802.11 n WLAN [ 3.958462] usb 1-1.2: Manufacturer: Ralink [ 3.962690] usb 1-1.2: SerialNumber: 1.0 [ 3.970174] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 3.978713] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 4.062261] usb 1-1.4: new high-speed USB device number 5 using dwc_otg [ 4.182749] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101 [ 4.189655] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.197041] usb 1-1.4: Product: USB 2.0 Hub [ 4.202095] hub 1-1.4:1.0: USB hub found [ 4.206198] hub 1-1.4:1.0: 4 ports detected [ 4.211858] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 4.220423] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 4.227104] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 4.235646] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 4.482255] usb 1-1.4.2: new high-speed USB device number 6 using dwc_otg [ 4.624049] usb 1-1.4.2: New USB device found, idVendor=0bc2, idProduct=ab24 [ 4.631128] usb 1-1.4.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 4.638687] usb 1-1.4.2: Product: BUP Slim BL [ 4.643091] usb 1-1.4.2: Manufacturer: Seagate [ 4.647559] usb 1-1.4.2: SerialNumber: NA7N0NPM [ 4.653049] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected [ 4.660137] scsi host0: usb-storage 1-1.4.2:1.0 [ 4.665893] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 4.674424] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 4.681051] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 4.689584] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 4.762253] usb 1-1.4.4: new low-speed USB device number 7 using dwc_otg [ 4.914769] usb 1-1.4.4: New USB device found, idVendor=062a, idProduct=0201 [ 4.921850] usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.929408] usb 1-1.4.4: Product: USB-compliant keyboard [ 4.949442] input: USB-compliant keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:062A:0201.0001/input/input0 [ 5.022929] hid-generic 0003:062A:0201.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-3f980000.usb-1.4.4/input0 [ 5.036528] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 5.045074] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 5.060894] input: USB-compliant keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:062A:0201.0002/input/input1 [ 5.133073] hid-generic 0003:062A:0201.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-3f980000.usb-1.4.4/input1 [ 5.147079] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 5.155698] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 5.162412] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 5.170873] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 5.663445] scsi 0:0:0:0: Direct-Access Seagate BUP Slim BL 0302 PQ: 0 ANSI: 6 [ 5.673066] sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.673607] vc4-drm soc:gpu@7e4c0000: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 [ 5.673707] vc4-drm soc:gpu@7e4c0000: master bind failed: -517 [ 6.218266] sd 0:0:0:0: [sda] Write Protect is off [ 6.223769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.241934] sda: sda1 sda2 sda3 [ 6.248367] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.718135] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 6.725982] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 6.778661] devtmpfs: mounted [ 6.782525] Freeing unused kernel memory: 500K (8089d000 - 8091a000) [ 7.521169] random: nonblocking pool is initialized